Z Graphics

Turn that awesome action shot into a Wall-StickeZ.

When it comes to creating your own custom wall graphics you can count on us for the highest quality product with years of experience. Choose from 5 different sizes and either a traditional die cut imager or mural style rectangle.

These Wall Stick-eZ are made from a adhesive-back fabric that sticks to any non-porous flat surface and removes easily with no residue for sharp-looking, seamless graphics and superior photographic images every time. The adhesive is removable, reusable, and repositionable. It does not remove paint from a primed wall, is safe to apply over wallpaper, applies without wrinkles, and does not rip.

Sizes Range from 16" x 20" to 36" x 48".

Die Cut Image

Have your image die cut and the background will be removed.

Square Cut Image

Have your Image cut with the background visible.

Order Your Customized Wall Stick-eZ Here!

Name
Address
Phone Number
Email Address
Type of Wall Stick-eZ you would like.
- Die Cut
- Square Cut
Don't worry about cropping or aspect ratios or orientation at this stage. Our experienced designers will send you a proof and intelligently crop the image for you so your image looks great. If you have any special instructions, please indicate below. Before printing your customized Wall Stick-eZ, we'll send you a digital proof for your approval.
Size
- 16 x 20 - $35
- 20 x 24 - $45
- 20 x 30 - $50
- 24 x 36 - $55
- 36 x 48 - $75
Quantity
Photos, either digital or prints, by another commercial photographer are copyrighted and can not be used. By submitting this order, you agree that the photo you submit is not copyrighted by another commercial photographer or company. You must agree in order to proceed.
- I Agree
Send Message

Thank you for ordering a customized Wall Stick-eZ. You will be contacted very soon with further instructions and payment options.

Oops. An error occurred.
Click here to try again.

Photo Submission Do's and Don'ts

For best quality results, take photos at the highest resolution your camera will take.
Smartphones usually don't produce high enough quality for Wall Stick-eZ larger than 16" x 20", especially if you have to zoom.
Close ups come out the best. Using an digital zoom is not recommended. When enlarged, they tend to look grainy, and that's not good. Optical zooms produce much better quality images. If you are not sure what you have, most likely you are using an digital zoom.
Do NOT send us a digital image or a scan of a print that was taken by another commerical photographer. We can tell if it was and will not be able to complete your order.

Installation Instructions

Step 1: GET READY

Pick a spot. Wall Stick-eZ adhere well to smooth, indoor surfaces. Recommended and NOT recommended surfaces are listed below. You want to choose a RECOMMENDED surface.

Measure. You don’t want to start only to find out you don’t have enough room.

Unwind and relax. If you’d been rolled up and stuck in a box you’d need to relax for a bit too. Lay flat for an hour prior to application.

(We’re talking about the Wall Stick-eZ, not you)

Step 2: GET CLEAN

You like clean clothes, Wall Stick-eZ like clean walls. Use a warm damp cloth to wipe down the surface and let it dry completely. DO NOT use soap or cleaning agents. They can make your Wall Stick-eZ stick poorly, which means it could fall down, and that’s just ugly.

Step 3: GET HELP

No need to call 911, just get a friend. This is important if you’re putting up one of our larger Wall Stick-eZ. Here’s why: you’ll start peeling the Wall Stick-eZ off the sheet when you realize it’s as big as you… and it’s sticky. When it sticks to itself, you’ll say something nasty, and then you’ll wish you had called that friend.

If you’re putting up smaller Wall Stick-eZ, then going solo is OK.

Step 4: GET IT ON

With help from that friend you called, start at the top of your Wall Stick-eZ and carefully peel it from its backing.

Place one corner on the wall and slowly smooth the rest into place using minimal pressure. If you make a mistake, gently peel the Wall Stick-eZ off the wall and reposition it. Take your time and you’ll do just fine.

Keep the backing in case you want to move your Wall Stick-eZ to a new location.

Recommended Surfaces:

Smooth Walls

Painted Drywall

Glass

Metal

Sanded Wood (without lacquer)

Inside, temperature controlled environments

NOT Recommended Surfaces:

Freshly painted walls. Wait 30 days after painting before you put up your Wall Stick-eZ.

Textured Walls

Unpainted drywall

Brick

Cinder Block

Porous, textured paneling

Outside, non-temperature controlled environments